A selection of replacement pumps for pressure washers which operate at 1450rpm. You will need to check the power requirements and shaft size and type of the engine to ensure these pumps will fit.
Annovi Reverberi oil seal kit. 7 seals total (3 piston seals + 4 other seals) - for XWL36.15, XWL50.15, RG21.20, XWF30.20, XWT21.20, WHW32.20, WHW15.20, WHW21.15, XWL41.20, SHP22.50, SHP15.50 pumps
Annovi Reverberi Valve kit for SHP22.50 and SHP15.50 pumps - 6 valves in total
RC12.17 Annovi Reverberi (AR) 24mm Solid Shaft Pressure Washer Pump delivering 12 litres per minute at 170 bar / 2465 Psi. This is a 1450rpm pump that is ideal for electric motors and can be coupled to various types of motors, directly or with flexible joint. It features a die-cast aluminium alloy pump body.
XT11.11 Annovi Reverberi has a 24mm solid shaft, runs at 1450 rpm and produces 11 litres per minute at 110 bar / 1595 Psi. You will need a 3HP motor to run this pump at full pressure and it is great for use with electric motors.
XT13.12 Annovi Reverberi (AR) 24mm Solid Shaft Pump 1450RPM 100 Bar 1450PSI. This is ideal for electric motors to drive it, you will need a motor of 3.3HP to run this at full pressure, it offers 13 litres per min flow rate @100 bar or 1450psi
XM15.15 Annovi Reverberi 24mm solid shaft pump 15 Litres flow rate with 150 bar or 2200PSI running at 1450RPM. The pump shaft in pressed high-strength steel & it offers rear cover with oil drain outlet and oil sight glass. Cap with dipstick for oil level on body pump.
RK15.20 Annovi Reverberi 24mm Solid Shaft Pump 3000PSI or 200 Bar. It is a 1450rpm pump that is ideal for electrical motors, it will deliver u0p to 15 litres per min so has great cleaning power.
The RK21.20 Annovi Reverberi is a 200 Bar / 2900 Psi pump which can be used at either 1000rpm (ideal for Tractor Power Take-off) which will output14lpm - or 1450rpm, which will output 21lpm (ideal for use with electrical motors or with a petrol engine using a gearbox). The pump body and cover in die-cast aluminium alloy.
The RW21.20 Annovi Reverberi (AR) has a 24mm solid shaft and 21 litres per minute flow rate, with 200 Bar / 2900 Psi and running speed of 1450RPM. There are various types of gasket system available depending on the application. Intake and delivery valves have plugs for easier maintenance.
RK15.28 Annovi Reverberi 24mm Solid Shaft Pump 280 Bar 4000PSI 1450RPM pump to be driven by electrical motors, this pump delivers up to 15 litres per min and the pump body and cover are in die-cast aluminium alloy
The Annovi Reverber XHW11.17 is a high-temperature pump with solid shaft suitable for water up to 85°c, A 11 litres flow rate and offering 170 bar or 2500PSI, the running speed of the pump is 1450RPM. You will need a 5HP motor to run at full pressure.
The RHW13.12 High Temperature 85°c Annovi Reverberi Solid Shaft Pump 13Lts Flow @ 120 Bar 1750PSI 1450RPM, Has piston reciprocating pumps for use on cleaning units and industrial systems operating with hot water. Pump body.
Pump and gearbox assembly - 200 Bar / 2990 Psi and 15 litres per minute, 7.5 Hp / 5.5 kW - 1" / 25.4mm hollow shaft. SAE J609 A-B Flange with Nickel Plated Brass Manifold, Suitable for Honda GX340 - 1/2" BSP Female inlet, 3/8" BSP Female outlet. 1450rpm
The XWL42.15 Annovi Reverberi (AR) has a 24mm solid shaft with a massive 42 Litres Flow rate that runs at 150 Bar / 2200 Psi and 1450rpm. It has a high-quality pump shaft pressed in high-strength steel & oversized friction bearings.
The XWL41.20 Annovi Reverberi (AR) has a 24mm solid shaft pump & offers a massive 41 litres flow rate, 200 bar or 2900PSI and runs at 1450RPM. You will need a 20HP motor to run at full pressure. A benefit of this pump is that it can be fitted to various motor types, either directly or via a flexible joint.
The RHW15.15 high-temperature Annovi Reverberi pump is suitable for water up to 85°c, having a flow rate of 15 litres per min and 150 bar or 2200PSI, The running speed is only 1450RPM. It also features a double PTFE gasket sealing system to minimise any water leaks.
The XW26.20 Annovi Reverberi (AR) 24mm solid shaft pressure washer pump runs at 1450rpm, and produces 26 litres per minute at 200 Bar / 3000 Psi, suitable for the toughest of cleaning jobs. You will need a motor of 12.5HP to run this at full pressure and it is ideally suited to be run by an electric motor.
The XW30.20 Annovi Reverberi (AR) has a 24mm Solid Shaft and has a flow rate of 30 litres per minute @ 200 Bar / 2900 Psi. You will need a 15HP motor to run this at its full pressure. It also has the pump body and cover in die-cast aluminium alloy.
The XW30.25 Annovi Reverberi (AR) is a 24mm solid shaft pump and has a flow rate of 30-litres per min at 250 Bar / 3600 Psi with a pump speed of 1450 rpm. It has a 3-piston alternating volumetric pump for use on cleaning units and industrial systems and also pump shaft in pressed high-strength steel.
The XW30.15 Annovi Reverberi has a 24mm solid shaft and a 30 litres flow rate, 150 bar or 2175PSI and speed of 1450RPM. The pump shaft in pressed high-strength steel & the pistons are driven by crank-connecting rod mechanism.
XW30.10 Annovi Reverberi has a 24mm solid Shaft with 30 litres flow @ 110 bar or 1450PSI running speed of 1450RPM. The pump body and cover in die-cast aluminium alloy.
The XWL50.15 Annovi Reverberi (AR) has a 24mm solid shaft with a massive 50 Litres per minute flow rate that runs at 150 Bar / 2200 Psi and 1450rpm. They have a high-quality pump shaft pressed in high-strength steel & oversized friction bearings.
For use at 1450 rpm the Interpump W2035 produces 200 Bar / 2900psi at 35 litres per minute. It has a 24mm male shaft, with a forged brass manifold. It has a 3/4"BSP female inlet and 3/8"BSP female outlet. It's ideal for use on drain cleaning pressure washers.
SXW15.35 Annovi Reverberi (AR) has a 24mm solid shaft with 15 litres flow rate providing 350 bar / 5100Psi running at 1450RPM. The pump body and cover are made in die-cast aluminium alloy, this can also be connected to various type of motor either directly or via flexible joint.
WHW15.20 Annovi Reverberi High temperature pump is suitable for water up to 85°c, with 15 litres flow rate per min, 200 bar or 3000PSI and running speed of 1450RPM with a solid shaft. Pump body, endplate and side covers in die-cast aluminium with protective electro-phoresis coating.